5
1. Ensure that electronic components — e.g., amplifiers —
are powered down before connecting
or disconnecting cables.
2. Connect a cable from the positive (indicated in red
or by a “+”) output terminal of the amplifier to the red
terminal on the rear of the speaker cabinet.
Connect the negative amplifier output from the same
amplifier channel to the black speaker terminal (
Drawing A
).
3. Connector Types:
• If your cable is terminated with banana pins,
they should slide into the holes at the end of the posts.
• If not, unscrew the colored cylinder around the metal
post to expose a second hole, insert the bare wire
or spade connector, and tighten the cylinder to hold
the cable in place.
Drawing A
3
Connection
-
+
Содержание MOON VOICE 22
Страница 1: ...Voice 22...
