background image

MOON AIR Analog FM Tuner 

 

Operating the AIR  

 

 

Making the AC Connection

 

 

1.

 

Connect the supplied AC power cable to the IEC receptacle, located on the rear panel of the tuner’s 
chassis.  Alternatively, if you wish, you may use a dedicated high-performance AC cable designed 
for source components.  Ensure that the AC wall outlet you use has a functioning ground.  For the 
best sonic performance, it is preferable that you plug your MOON AIR Analog FM Tuner directly 
into a dedicated AC outlet and avoid using an extension cord.   

 

2.

 

In order to obtain the maximum performance from your audio system, we strongly recommend that 
the detachable power cord not come into physical contact with any of the interconnect cables 
running to and from your AIR.  In the event that this can’t be avoided, you should ensure that any 
cables coming into contact with each other are crossed at ninety degree angles to minimize the 
contact area.

 

 

Turning on your MOON AIR for the first time  

 

Prior to turning the tuner on for the first time, make sure that every cable is properly connected to 
avoid any problems.  Then turn on your tuner in the following manner: 

 

 

1)

 

Flick the main rocker switch labeled “POWER” to the ‘1’ (on) position on the rear of the AIR.   

 

2)

 

Press the push button labeled “Stand by/On” on the center of the front faceplate.  The blue LED will 

illuminate and the digital display will indicate a tuned station frequency. 

 

On and Off Sequence 

 

To avoid having any annoying noises (ie. “thumps” and “pops”) eminate from your speakers when 
powering your AIR on or off, you should  

 

1)

 

Always power up your AIR before powering up your preamplifier and/or amplifier. 

 

2)

 

Always power down your AIR after powering down your preamplifier and/or amplifier. 

 

We recommend that you leave your MOON  AIR  Analog  FM  Tuner powered up at all times to 
maintain optimal performance.  In the event that you plan to be away from your home for a few days, 
powering off the tuner may not be a bad idea.  Once fully “broken-in”, please keep in mind that your 
AIR  will require several hours of playing time before it reaches its peak performance after you’ve 
powered it up again. 

 
 

____________________________________________________________________________________ 

 

Operating The AIR 

 

 

 

                                                        11 

Содержание MOON AIR

















Отзывы: