Simac FP770 Series, Руководство пользователя

Страница: 7 / 11

to use your liquidiser
1 Fit the jug to the power unit. Then fit the drive shaft/bottom blade to the
jug .
2 Fit the top blade to the drive shaft, taking care to rotate the top blade clockwise
until it fits fully into place.
3 Put your ingredients into the jug.
4 Check the seal
is fitted to the lid correctly (fit the seal so the lipped edge of
the seal faces outwards) then fit the lid . Fit the filler cap.
5 Turn the swivel head clockwise and press down until it clicks shut to lock
securely . The liquidiser will not operate if the head is not located
correctly.
6 Select MAX speed or use the pulse control.
hints
●
When making mayonnaise, put all the ingredients, except the oil into the liquidiser.
Then with the machine running, pour the oil down the hole in the lid.
●
Thick mixtures, eg pates and dips, may need scraping down. If it’s difficult to
process, add more liquid.
●
When crushing ice, add 15mls (1tbsp) water to 6 ice cubes. Use the pulse control.
important
●
Allow all liquids to cool to room temperature before placing them in the
liquidiser.
●
To ensure the long life of your liquidiser, never run it for longer than 60 seconds.
Switch off as soon as you’ve got the right consistency.
●
Don’t process spices - they may damage the plastic.
●
The machine won’t work if the liquidiser is fitted incorrectly.
●
Don’t put dry ingredients into the liquidiser before switching on. If necessary, cut
them into pieces; remove the filler cap; then with the machine running, drop
them through one by one.
●
Don’t use the liquidiser as a storage container. Keep it empty before and after
use.
●
Never blend more than 1 1 ⁄
2
litres (2pts 12fl oz) - less for frothy liquids like
milkshakes.
choosing a speed for all functions
tool/attachment function speed
knife blade cake making 1 – 9
rubbing fat into flour 5 – 9
adding water to combine
pastry ingredients
8 – 9
chopping/pureeing/pates Max
whipping tool egg whites (best results approx. 4 minutes) 6
cream (best results approx. 1 minute) 6
dough tool yeasted mixes 5 – 9
plates - slicing/ firm food items such as carrots. 3
shredding/ hard cheeses 8
chipping softer items such as cucumbers,
tomatoes
1 – 3
centrifugal juicer fruit and vegetables Max
liquidiser lighter blending eg. batters, milkshakes
soups, sauces, pate and mayonnaise
Max
maximum capacities
●
Shortcrust pastry flour wt 340g/12oz
●
Yeast dough flour wt 500g/1lb 2oz
●
One stage cake total wt 800g/1lb 11oz
●
Chopping meat total wt 800g/1lb 11oz
●
Liquidiser 1.5litres/2pts 12fl.oz
●
Whipping tool 4-6 egg whites
using the attachments
see chart for speed of each attachment.
quad knife blade/ dough tool
To fit the quad knife blade, first fit the drive shaft onto the metal
pin in the bottom of the bowl. Then assemble the knife blades in
the order shown taking care to rotate the top blade clockwise
until it fits fully into place. Then fit the knife blade assembly onto
the drive shaft inside the bowl. To remove, grip the assembly by
the top of the drive shaft and remove the entire blade assembly
from the bowl. To separate the quad knife blade, take extra care
to hold each section by the plastic component and rotate the top
blade anticlockwise until it becomes free from the bottom blade.
The knife blade is the most versatile of all the attachments. The length of the
processing time will determine the texture achieved. For coarser textures use
the pulse control.
Use the knife blade for cake and pastry making, chopping raw and cooked
meat, vegetables, nuts, pate, dips, pureeing soups and to also make crumbs
from biscuits and bread.
Use the dough tool for yeasted mixes.
hints
knife blade
●
Cut food such as meat, bread, vegetables into cubes approximately 2cm/3/4in
before processing.
●
Biscuits should be broken into pieces and added down the feed tube whilst the
machine is running.
●
When making pastry use fat straight from the fridge cut into 2cm/3/4in.cubes.
●
Take care not to over-process.
dough tool
●
Place the dry ingredients in the bowl and add the liquid down the feed tube
whilst the machine is running. Process until a smooth elastic ball of dough is
formed this will take 20 - 30 secs.
●
Re-knead by hand only. Re-kneading in the bowl is not recommended as it may
cause the processor to become unstable.
whipping tool
Use for light mixtures eg egg whites and cream.
using the whipping tool
1 Fit the bowl.
2 Fit the whipping tool to the drive shaft, making sure it is fully engaged. The
whipping tool should locate at the very bottom of the drive shaft.
3 Fit the assembly into the bowl.
4 Add the ingredients.
5 Fit the lid and switch on.
hints
●
Best results are obtained when the eggs are at room temperature.
●
Ensure the bowl and whipping tool are clean and free from grease before
operating.
slicing/shredding discs
slicing plates – thick , thin
Use for slicing cheese, carrots, potatoes, cabbage, cucumber, courgettes,
beetroot and onions.
shredding plates – thick , thin
Use for shredding cheese, carrots, potatoes and foods of a similar texture.
rasping plate
Grates Parmesan cheese and potatoes for German potato dumplings.
chipper plate – fine
Use to cut potatoes and firm ingredients for salads, garnishes, casseroles and
stir fries (e.g. carrots, swede, courgette & cucumber).
safety
●
Never remove the lid until the cutting plate has completely
stopped.
●
Handle the cutting plates with care – they are extremely sharp.
3