Sima EUROTRON PLUS, Оригинальное руководство пользователя, Страница: 28 / 50

11
ENGLISH
9. SAFETY RECOMMENDATIONS
NOTE: Before starting the machine, read carefully the instructions and observe safety rules recommended in
this manual and labour safety standards of each location to avoid accidents, damage and injury;
Start-up your machine.
• It is very important to ensure the stability of the machine before it is started; you should always place it in horizontal
position, bringing it to the floor by fasteners using existing holes leading into the bases of the legs.
• Do not connect the machine until its stability is not guaranteed.
• Always use personal protective equipment (EPI) according to the work being done.
• Before connecting or boot the computer make sure that nobody is in their area of risk.
• Start-up the machine according to the manufacturer's instructions.
• Make sure your computer is located in a firm, level surface.
• Check that the power supply voltage corresponds with the equipment performance.
• Check the direction of the rotation is correct.
• Visually inspect all joints: bolts, nuts, welds, rust, receipts, etc.
• Make sure the extension cord of the machine is not in contact with points of high temperature, oil, water, sharp
edges, avoid being trampled or crushed by passing vehicles and placing things on it.
Management of the machine, equipment or facility
• Use the machine for the purposes for which it was designed.
• Do not leave left the machine with the engine running.
• When moving the machine always do it with the engine stopped and moving parts blocked.
• This machine must not be used in the rain.
Stop the machine, equipment or facility
• Never handle or operate on the mechanical and electrical machine with the engine running or connected to the main
supply.
• Stop the equipment according to manufacturer's instructions.
• Make general cleaning of equipment / installation.
• Check the condition and securing of equipment, tools, accessories and whether they are adequate.
This equipment will be used only by authorized and trained personnel with specific training and
appropriate.
If during use of the machine notes any anomalies, please report immediately to his superior.