Composite Connection
Operation
1. Connect the Ct-Q1 unit as shown on page 3.
2. Select the appropriate input by pressing the Input select switch. Green
indicator light signifies Composite signal. Orange indicator light signifies
S-video input signal.
3. Select the desired video enhancement mode by pressing the Video
Enhancement button. The button cycles between six enhancement modes
as follows:
Pressing the button six times begins the cycle again.
4. The LED indicator light shows which Input format and Enhancement
mode are selected. For example, a steady green light means you have
selected a composite input signal and will output in the Normal video
mode. An orange blinking light indicates an S-video input signal with one
of three enhancement modes. Use the steady indicator light as a fixed
point to determine the desired enhancement mode. Review the chart
below to determine the correct setting. If unsure which video
enhancement mode is selected, look at your video monitor while toggling
through the options.
5. Select A/V input on your recording VCR or DVD and press RECORD.
6. Then press PLAY on your playback device.
Playback
Camcorder, VCR
