ConneX™ Button Box Mount:
Button boxes have entered the market as a
consolidated solution to in-game keyboard functions.
This iRacing package comes with the Patriot Box™ by
Derek Speare Designs, only available through Sim
Seats.
The button box mount simply bolts directly to the
wheel deck.
Use a washer between the mounting
surface and the button box mount to minimize paint
damage.
It can be doubled up with any of the other ConneX accessories (a longer bolt may
be required). The Patriot Box™ is mounted with sticky back Velcro (included).
Computer Hardware Setup:
Remove the computer from its packaging and place (ideally) to the right of the simulator to
begin wiring setup. Start with wiring the monitor power cables and DVI cables. Depending
on the video card, one or two of the monitors may need special mini-displayport to DVI
adaptors. These are included if applicable. It is a good idea now to start working on wire
management for the monitors and speakers along the Sim Seats triple monitor mount.
After the monitors are powered and plugged in, place the Logitech sub-woofer to the far
right corner of the setup area and plug in the front channels and into the computer.
Note:
There may be two sound cards with your new computer. The upgraded sound card is usually
the lower card. When in doubt, if it doesn’t work, try the other!
Install the rear speaker
mounts on the seat and run the wires to the sub-woofer.
Run power and USB plugs for the Logitech wheel and pedals. Run the USB plug for the TH8
shifter and button box.
Power up the PC and move on to the software setup process.
Computer Software Setup:
After the PC has booted up, the center monitor may be the only screen showing Windows.
This will require setup to achieve the triple screen desktop display. Open the Catalyst
Control Center and click “Create Eyefinity Dispay Group”. From here follow the steps to
Содержание iRacing Pro
Страница 7: ......
