9
|
9 11
Controlling the LEDs
A sample LED profile can be downloaded from the product page.
To enable or adjust LEDs, navigate back to the ‘USBD480’ page in ‘Dash Studio’. You
may also refer to Pages 5/6 of this document.
Check the ‘SIMLAB DASH 2.0’ module (1). A ‘Connected’ indicator will appear to
confirm the connection. Press ‘Profiles manager’ (2) to import the profile.
Click on the import profile icon (3).
Browse to the location where you stored the LED profile, select it and press ‘Open’.
The load the profile, make sure it is selected (SD43-LED) and press ‘Load’ (4).
1
2
3
4