SWING ARM GRINDER
OPERATING INSTRUCTIONS
1. After the grinding wheel has been
dressed, place a chain in the chain guide.
2.
WITH THE MOTOR OFF
move the
chain into the grinding wheel. Position
the
the chisel cutter against the grinding
wheel
wheel so the corner of the cutter and the
corner of the grinding wheel are aligned. Position the cutter stop against the back of the
cutter and set the depth stop.
3
. Move the chain away from the grinding wheel. Start the motor - wheel turning
into
the
tooth . Move the chain slowly into the grinding wheel. Make final adjustments with the
cutter stop and the depth stop screw. Don’t take too much material off the cutters at one
time - As it may cause them to be burned.
4. Proceed to the next cutter by moving the chain guide away from the grinding wheel. Pull
the chain forward until the next cutter to
be sharpened passes the cutter stop. Pull
the chain backwards until the cutter is
positioned against the stop. Move the
chain guide into the grinding wheel and
sharpen positioned cutter. Proceed until
all cutters on one side are sharpened.
5.
TURN THE MOTOR OFF
When the grinding wheel stops, swing the arm around to the
other side. Reverse the motor and repeat the above procedure.
The dressing of the grinding wheel will affect the shape
of the chisel cutter.
The leading edge diamond dresser determines the side
plate angle of the chisel cutters.
(See examples1 and 2 below.)
Example 1 is very close to the desired shape.
The top angle of the grinding wheel determines the top plate
angle of the chisel cutter.
The flatter the top plate angle on the grinding wheel,
the lesser the angle on the top plate of the chisel cutters.
The steeper the angle on the grinding wheel, the greater the
top plate angle on the cutter.
Always proceed slowly in dressing the grinding wheel.
The position of the diamond dresser can be changed to achieve the desired grinding
wheel shape. Don’t take too much material off the wheel at one time.
Using caution will lengthen the life of the diamond dressers and grinding wheel
considerably.
WARRANTY VOID
IF OTHER THAN SILVEY GRINDING
WHEELS ARE USED
( USE WHEEL SNO21-H )
ALWAYS USE EYE PROTECTION
Содержание Silvey SNO21-H
Страница 3: ......
