Ag102 Evaluation Board User Manual
2
3
Introduction
This manual is a guide to using the “EVALAg1x2” (Rev 1R or higher) evaluation board
with our Ag102 Sealed Lead Acid (SLA) battery charger module. The EVALAg1x2
evaluation board can be powered by a bench power supply with a range of 9V to 36V
and will charge SLA batteries with a capacity between 1.2Ah and 7Ah.
4 Board Description
4.1 Input
The input power is supplied to the board through connector J12 (see Figure 1), this is a
standard 2.5mm DC10 connector. The centre pin of the connector is positive and the
outer is negative. The input current can be measure by removing LK1 and connecting
an ammeter across these pin.
LED1 will be illuminated when the input supply is ON.
Figure 1: Board Layout
