SilverStar BACKPACKER MV, Руководство пользователя

Страница: 11 / 23

Backpacker MV www.silverstarmobility.com 11
I I I . I N S T A L L A T I O N
Optional Onboard Battery Pack Installation
The optional onboard battery is designed for easy in-
stallation as it does not require wires to be routed
through or under the vehicle. If using the optional Type
II onboard battery pack, please refer to the manual
supplied with the pack for proper operating instruc-
tions and harness connections.
Follow these steps to install the onboard battery
(Type I):
1. Remove the rubber caps and nuts from the protrud-
ing bolts on the side of the lift motor housing. See
figure 4 .
2. Slide the spacer bar onto the protruding bolts, if not
already installed.
3. Mount the battery case onto the protruding bolts and
secure into position with the nuts and rubber caps
removed earlier.
See figure 4 .
4. Insert the onboard battery into the battery case, making
sure that the connector on the bottom of the battery
aligns and fully connects with the mating connector
inside the battery case.
5. Connect the male connector on the battery cable
to the female connector at the base of the Back-
packer MV.
6. Secure the battery cable to the other cables with
wire ties.
Follow these steps to install the onboard battery
(Type II):
1. Remove the rubber caps, nuts, and spacer bar from
the protruding bolts on the side of the lift motor hous-
ing.
See figure 5 .
2. Mount the battery pack base onto the protruding bolts
and secure into position with the nuts removed ear-
lier.
See figure 5 .
3. Insert the onboard battery into the battery pack base,
making sure that the connector on the bottom of the
battery aligns and fully connects with the mating con-
nector inside the battery pack base.
4. Connect the male connector on the battery cable to the
female connector at the base of the Backpacker MV.
5. Secure the battery cable to the other cables with
wire ties.
Figure 5. Onboard Battery Installation (Type II)
BATTERY
PACK
BATTERY
PACK BASE
LIFT MOTOR
HOUSING
Figure 4. Onboard Battery Installation (Type I)
SPACER BAR
NUTS