Bomi Furniture P/L trading as Silver Lynx ABN 99 006 489 541 11-17 Sages Road Glenroy Victoria 3046 Australia
T:+61 3 9359 4000 F:+61 3 9359 4322 E:[email protected] W:www.silverlynx.com.au
STEP 9
–
To
set up the slat and spine system, proceed to the instructions titled “Amendment to
instructions for all Silverlynx beds”.
Note the 2x 38mm screws provided in the hardware pack can
be used in this section of the assembly.
NOTES
•
Button head bolts should be regularly inspected and may need to be retightened periodically
•
Never drag or move assembled bed as this may damage the bed
CARE & MAINTENANCE
Your Silver Lynx product is crafted with care, properly maintained, it will mature over time
developing a rich deep patina enhancing its appearance. To get the best performance from your
Silver Lynx product, please follow the simple care instructions listed below.
•
Do not use silicone based polishes/cleaners at any time.
•
Dust surfaces gently with a feather duster then wipe gently with a slightly damp cloth/chamois.
•
Do not allow liquids, damp clothes to remain in contact with lacquered surface for extended
periods.
•
Never place furniture in close proximity to heating outlets.
•
Exposure to direct sunlight will cause colour fading to fabrics, leathers and timber finishes.
•
Do not allow solvents, abrasives or heated objects to come in contact with the suite.
•
Do not use cordless drivers or power drills to tighten your bed brackets, as over-tightening can
cause the foot end rail to bow.
Contact your retailer or our sales office for further information
