14.2.3
Power boost cooking mode selection
Press the button to activate the power-assisted cooking area
Power-assisted cooking button is valid For max 5 minutes.
Power boost cooking cannot be activated on all
stoves at the same time.
Front cooking areas have more power than rear
areas. Therefore, if you want to do power-assisted
cooking in one of the front cooking areas, you
cannot do any cooking on the cooking areas
behind the respective area.
14.2.4
Bridge selection
It is the ability to create a single section with the same power level
by working together with the cooking areas of 1 and 2 and the
cooking areas of 3 and 4.
To activate the bridge function; you activate the bridge function by
pressing the bridge button ( ) located on the cooking areas (1 or 4
numbered areas). The bridge symbol appears on the cooking area
panels that you have created a bridge function for (Fig. 56).
You can check the cooking level on the cooking area with the
bridge button.
CAUTION!
Make sure that the pot is placed in the center of a
single cooking area. The most suitable container is
an oval or rectangular pot.
Overheating protection
When excessive heat is detected in your appliance, your stove will
automatically turn off.
Fig. 54
1
2
4
3
1
2
3
4
1-2
3-4
Fig. 55
Fig. 56
USE OF PRODUCT
Stove panel > Bridge selection
11.02.2021
FLOW-IN PRO USER MANUAL EN
40