5.
Install the housing from the
upper side using 2 short
brackets supplied in installation
accessories (Fig. 18)
Fig. 19
1- Electronic Circuit Box
2- Electronic Circuit Box Connection
Screw
3- Rove
6.
Place the hood circuit box at a
suitable location in the cabinet.
Insert roves to four 3.9x22
screws and mount inside the
Fig. 20
1- Body
2- 8x 3.5 x 6.5 Installation Screw
3- Housing Air Exhaust Cover Plate
7.
n
Front and rear air exhaust
sections are located on the
housing. Remove housing
air exhaust cover plate
according to installation plan
Fig. 21: I
1- Body
2- 8x 3.5 x 6.5 Installation Screw
3- Housing Air Exhaust Plate
8.
Install air exhaust plate supplied
together using 8x 3.5 x 6.5
Fig. 22
1- Ø150 mm Flexible Pipe
ASSEMBLY OF PRODUCT
02.05.2019
DOWNDRAFT Hoods
22