![background image](http://html1.mh-extra.com/html/silverline/951155/951155_manual_1273773006.webp)
www.silverlinetools.com
5
951155
Always Disconnect
Before changing fittings or accessories, always ensure that your tool is
•
disconnected from the power source.
Switch off before connecting
Ensure that the power tool is switched off before connecting to the power
•
source. If the power tool stops unexpectedly, turn the power switch to off.
Do not abuse the power cord
Be sure your cable or extension cable is in good condition. Always have
•
a damaged cable or extension cable replaced at an authorised service
centre before using it. Never yank or pull the cable to disconnect it from
the power socket. Never carry your tool by its cable. Keep the cable away
from damp, heat, oil, solvents, and sharp edges.
Don’t leave the tool running unattended
Always wait until your tool has completely stopped functioning, and has
•
been unplugged, before leaving it.
Hedge Trimmer Safety
Always check the work area for hidden objects, fencing, cables etc. Be
•
sure that it is safe to cut before beginning a job.
Always wear appropriate safety equipment. Use of this tool requires the
•
use of gloves, eye or face protection, and sturdy clothing.
If the hedge trimmer becomes jammed, switch off immediately. Unplug
•
the hedge trimmer from the power supply before attempting to clear
jammed material.
Do not use this product in wet conditions. Ensure that material to be cut
•
is dry before starting work.
Take care to keep the power lead away from the cutting area. Cutting
•
through the power lead may cause an electric shock.
Always keep cutting blade properly lubricated, keep covered when not
•
in use.
Hedge Trimmer 710W
951155_instructions.indd 5
22/12/09 09:44:02