FR
14
Problème
Cause possible
Solution
Le démarreur ne s’éteint pas alors que
le bouton d’alimentation (2) est appuyé
Arrêt automatique
Laissez l’appareil débranché des câbles et de tous les autres dispositifs pendant environ 30 à 40 secondes, et il
devrait alors s’éteindre automatiquement
Le démarreur ne s’allume pas alors que
le bouton d’alimentation (2) est appuyé
Le bloc-batterie au lithium-polymère (1)
est déchargé
Rechargez-le à l’aide du cordon d’alimentation fourni. Si après la charge, l’appareil ne s’allume toujours pas il se
peut que cela signifie que la batterie a atteint la limite de sa durée de vie et devra être remplacée (voir la section
« Traitement des déchets » pour jeter votre appareil dans le respect des régulations et normes en vigueur)
Durant la charge, le démarreur arrête
brusquement de charger et se met à
émettre un bip
Cela dénote un problème dans le
procédé de charge ; le bloc-batterie
au lithium-polymère a détecté un
problème
1. Appuyez en maintenant appuyé le bouton d’alimentation durant 10 à 30 secondes pour forcer la poursuite
de la charge et, peut-être régler le problème
2. Après avoir appuyé sur le bouton d’alimentation, débranchez le chargeur de la prise secteur et laissez le
démarreur au lithium se reconfigurer
3. Rebranchez le chargeur au démarreur au lithium Jump pour vérifier si la charge se déroule désormais
normalement
4. Si le même problème se vérifie et que le démarreur arrête brusquement de charger et commence de nouveau
à émettre un bip, DÉBRANCHEZ-LE IMMÉDIATEMENT, et ne l’utilisez plus. Prenez avis auprès d’un technicien
Silverline.
Remarque :
Après avoir appuyé sur le bouton d’alimentation durant ce procédé, la lumière LED (6) s’allume.
Ceci est normal. Après avoir déchargé le chargeur la lumière LED pourrait s’éteindre. (voir ‘Utiliser les 3 modes
d'éclairage : lampe torche, lumière forte, lumière stroboscopique et SOS ) avant de rebrancher le chargeur
Le bloc-batterie au lithium-polymère
devient chaud ou commence à gonfler
Le bloc-batterie au lithium-polymère
est défectueux
DÉBRANCHEZ IMMÉDIATEMENT le cordon d’alimentation et les câbles et ne l’utilisez plus. Prenez avis auprès
d’un technicien Silverline.
Si mon appareil ne fonctionne pas
423352_Manual.indd 14
26/07/2018 15:59