Silvercrest WAKE-UP LIGHT KH 2600, Руководство по эксплуатации

Страница: 15 / 62

13
Setting up and connecting
KH 2600
GB
IE
Activating the remote control battery
The remote control battery is already inserted when delivered.
Activate the battery by removing the isolation strip.
¡
Changing the remote control battery
Press, with the fi ngernail, the recess (A) to the right
¡
and, at the same time, pull the battery compartment
out.
Insert a 3 V battery type CR 2032 in the battery
¡
compartment. The side with the marking "+" points
upwards.
Slide the battery compartment completely back into
¡
the remote control.
Providing mains power
Place the device approx. 40 to 50 cm away from your head (i.e. on the
¡
bedside table).
Plug the mains power plug into a wall socket. In the display
¡
4
the time of
day (0:00 o'clock) and the temperature will be shown.
VHF wire antenna
For VHF reception completely unfold the wire antenna
¡
24
.
Connecting the headphones
If required you can connect headphones (with a 3.5 mm jackplug) to the
¡
connection socket
21
on the rear panel of the device. The speakers then
switch off automatically.