8
SWKS 2400 E1
GB
IE
1) Lift the kettle off of the base when filling it!
2) Press the unlocking button
and open the lid.
NOTE
►
When filling it, hold the kettle upright. This is the only way to read the
markings on the scale
correctly.
3) Fill the kettle...
–
at least as far as the “minimum” mark, so that the appliance does not
overheat,
–
no further than the “maximum” mark, so that boiling water cannot spill out.
4) First close the lid, then place the kettle on the base
, so that it sits securely
on the base
.
5) Now insert the plug into the mains power socket.
6) Push the ON/OFF switch
downwards (position “I”) so that it engages.
WARNING - RISK OF INJURY!
►
For safety reasons you should not open the lid when the water is boiling or
extremely hot. There is a risk of scalding.
7) The light inside the scale
shows that the appliance is now heating the water.
8) As soon as the water is boiling, the appliance will switch itself off, the
ON/OFF switch
clicks upwards and the light goes out.
INFORMATION
►
This appliance is fitted with an overheating protector: if the appliance is
switched on accidentally, without any water in the kettle, the appliance
automatically switches itself off.
If, for example due to a non-closed lid the appliance boils dry, the appliance
switches off automatically.
In such cases first allow the appliance to cool down before using it again.
IB_270348_SWKS2400E1_LB6.indb 8
05.08.15 16:26
