34
SSK 300 A1
GB
Preparation of the soup now takes place automati-
cally. The appliance heats and mixes at regular
intervals.
As soon as the preparation process is complete,
the appliance will stop automatically. The signal
tone will sound 10 times and the LEDs will fl ash.
TIPS
►
You can stop the preparation process at
any time by pressing the MARCHE/ARRÊT
button
e
or by repeatedly pressing the button
of the selected programme. The control lamp
then goes off and the appliance switches itself
off .
►
If you want refi ne your meals by adding milk,
cream, fl our, starch or similar ingredients, do
not add these until the preparation process
is complete. Then you can mix everything
quickly by pressing the PULSE button
t
.
Otherwise, these ingredients could burn.
TIP
►
For simple preparation of a fruit compote:
add water up to the MINIMUM/0.3 Litres
marking in the blender jug
3
. Add peeled
and chopped fruits (for example, apples or
pears). Select the desired soup function.
Preparing smoothies/milk shakes/
crèmes
1) Insert the plug into a mains power socket.
The appliance emits an acoustic signal.
2) Add all the ingredients into the blender jug
3
.
Take care not to exceed the MAXIMUM/1.7
Litres marking.
3) Press the MARCHE/ARRÊT button
e
. The
appliance emits an acoustic signal. All control
lamps fl ash.
4) Press
the
MIXER button
z
. Two signal tones will
confi rm your selection and the corresponding
signal lamp will fl ash.
The blending process starts and runs through several
phases. After 3 minutes, the blending process is
complete and the appliance stops. The signal tone
sounds 10 times.
NOTE
►
You can stop the preparation process at
any time by pressing the MARCHE/ARRÊT
button
e
or by repeatedly pressing the button
of the selected programme. The control lamp
then goes off and the appliance switches itself
off .
Preparing vegetable puree
1) Insert the plug into a mains power socket.
The appliance emits an acoustic signal.
2) Add the cooked vegetables to the blender
jug
3
. Take care not to exceed the MAXIMUM/
1.7 Litres marking.
3) Press the MARCHE/ARRÊT button
e
. The
appliance emits an acoustic signal. All control
lamps fl ash.
4) Press
the
MIXER
button
z
. Two signal tones will
confi rm your selection and the corresponding
signal lamp will fl ash.
The blending process starts and runs through several
phases. After 3 minutes, the blending process is
complete and the appliance stops. The signal tone
sounds 10 times.
NOTE
►
You can stop the preparation process at
any time by pressing the MARCHE/ARRÊT
button
e
or by repeatedly pressing the button
of the selected programme. The control lamp
then goes off and the appliance switches
itself off .
IB_91022_SSK300A1_LB2.indb 34
IB_91022_SSK300A1_LB2.indb 34
31.07.14 16:33
31.07.14 16:33
Содержание SSMS 300 A1
Страница 3: ...C A B ...