Silvercrest SSH 600 A1, Руководство по эксплуатации

Страница: 20 / 54

SSH 600 A1
GB
│
IE
│
NI
│
17 ■
Troubleshooting
This section contains important information on fault identification and
rectification.
WARNING
► Repairs to electrical appliances should only be carried out by
specialists trained by the manufacturer. Improper repairs can
cause considerable risks to users and damage to the appliance.
Fault causes and remedies
The following table will help you to identify and rectify minor
malfunctions:
Fault Possible cause Remedy
The appliance
will not switch
on.
The plug is not con-
nected.
Insert the plug com-
pletely into the mains
power socket.
The mains socket is not
supplying any power. Check the house mains
fuse.
The tilt cut-out has
been activated.
Plug the appliance up-
right into the mains sock-
et with the display
3
at
the top.
The appliance
switches itself to
standby mode.
The set heating time
has expired. Increase the heating
time if you wish.
The error code
(( appears on
the display
3
.
There is a fault with the
temperature sensor. Contact our customer
service department.
NOTE
► If the above-mentioned solutions do not resolve the problem,
please contact Customer Service (see section
Service
).