Silvercrest SSE 6 D2, Инструкции по эксплуатации и безопасности

Страница: 19 / 86

19 GB/IE
Operation
Inserting/replacing the
batteries
Caution! Product damage!
Note:
Always observe the polarity indicated
on the battery compartment
4
when inserting
the batteries!
Note: Always use batteries of the type
Micro AAA, LR03.
Note: Always use batteries of the same type.
Turn the lid of the battery compartment
4
anticlockwise until the point on the
lid is adjacent to the point “ ” on the
product and the lid can be removed (see
Fig. C).
Remove the lid from the battery compart-
ment
4
.
Remove the old batteries, if present.
Insert new batteries according to the
polarity diagram of the battery compart-
ment
4
.
Close the lid of the battery compartment
4
by replacing it onto the battery com-
partment
4
and turning it clockwise until
the point on the lid is adjacent to the point
“ ” on the product (see Fig. C). Pay at-
tention to the recesses on the housing.
The display
9
lights up green and all in-
dicators flash 3 times. If the dispenser
does not contain any soap, the “Fill
level” indicator
13
continues to flash.
Setup / First use
Place the product on a suitable, level
surface.
Open the lid
1
.
Pull the plug
2
from the soap refill
opening
3
.
Pour liquid soap into the soap tank.
Note: During filling, note the “Max”
mark that is visible, if you look into the
soap tank. Never exceed the “Max”
mark when filling with soap! Otherwise,
the product may overflow (see Fig. A).
Note: Pour in at least 130 ml of soap;
otherwise, the “Fill level” indicator
13
will flash.
Replace the plug
2
in the soap refill
opening
3
.
Remove the protective film from the
display
9
and close the lid
1
. The
product is now ready for use.
Display indicators
Note: The display indicators are only visible
if the lid
1
is open.
The “Soap quantity” indicator
12
shows
the amount of soap dispensed for each
use.
The “Fill level” indicator
13
shows how
much soap remains in the soap tank.
The fewer bars are visible, the less soap
there is in the soap tank. If only one bar
remains the “Fill level” indicator
13
be-
gins to flash. Refill the soap tank.
Note: Pour much soap in the soap tank
until the indicator stops flashing.
The “Battery” indicator
14
shows the
charge level of the batteries that have
been inserted. If only one bar remains
you should replace the batteries soon.