Silvercrest SSE 6 C3, Руководство по эксплуатации

Страница: 21 / 88

■ 18 │
GB
│
IE
SSE 6 C3
Setup / first use
1) Place the appliance on a suitable, level surface .
2) Open the lid
2
.
3) Pull the plug
1
from the refill opening
q
.
4) Pour liquid soap into the soap tank .
note
► During filling, note the "Max" mark that is visible, if you look into the
soap tank . Never exceed the "Max" mark when filling with soap!
Otherwise, the appliance may overflow .
► Pour in at least 70 ml of soap; otherwise, the "Fill level" indicator
e
will
flash .
5) Replace the plug
1
in the filling opening .
6) Remove the protective film from the display
8
and close the lid
2
.
The appliance is now ready for use .
Display indicators
note
► The display indicators are only visible if the lid is open .
■ The “Soap quantity” indicator
w
shows the amount of soap
dispensed for each use .
■ The “Fill level” indicator
e
shows how much soap remains in the
soap tank .
The fewer bars are visible, the less soap there is in the soap tank .
If only one bar remains in the fill level, the “Fill level” indicator
e
begins to flash . Refill the soap tank .
■ The “Battery” indicator
r
shows the charge level of the batteries
that have been inserted . If only one bar remains in the “Battery”
indicator
r
, you should replace the batteries soon .
IB_291803_SSE6C3_LB8.indb 18 22.11.17 16:14