Silvercrest SRWK 800 A1, Руководство по эксплуатации

Страница: 89 / 140

■ 86 │
GB
│
MT
SRWK 800 A1
Manual station search
♦ In radio mode, press the │ ‒
5
or the │ +/MEM
7
button for about 2 seconds to search for a station with a lower
or higher frequency . The search stops at the first station with a
sufficiently strong signal .
Searching for stations manually
♦ In radio mode, set the desired station by turning the TUNING/
MIN. ‒/+ dial
3
. To do so, turn the TUNING/MIN. ‒/+ dial
3
clockwise or anticlockwise to search for a radio station with lower
or higher frequency . The frequency can be changed in steps of
0 .05 MHz .
NOTE
► The frequency of the station is shown on the display
1
and the
loudspeaker
0
is switched off during station search .
Saving stations manually
♦ To store the current radio station, briefly press the │ +/MEM
button
7
and then use the TUNING/MIN. ‒/+ dial
3
to select
the desired programme position ( P01–P20 ) . The programme
position numbers are shown at the bottom of the display 1 .
♦ Briefly press the │ +/MEM button
7
to save the current
radio station in the selected programme position .
Calling up saved stations
♦ In radio mode, briefly press the │ ‒ button
5
once to call up
the next higher programme position .
♦ Alternatively, press the │ ‒ button
5
and, within the next
3 seconds, use the TUNING/MIN. ‒/+ dial
3
to select the
desired programme position ( P01–P20 ) . To do so, turn the
TUNING/MIN. ‒/+ dial
3
clockwise or anticlockwise to
search for a lower or higher programme position .