Silvercrest SNM 33 C1 Скачать руководство пользователя

Страница: 29 / 30

US-EN

Disposal / Guarantee / Service / Manufacturer

Disposal

Disposal / Guarantee / Service / Manufacturer

- Dispose of devices with dangerous defects immediately and ensure that they can no

longer be used.

- Do not dispose of the sewing machine in normal domestic waste.

- This product is subject to UL 1594.

Dispose of the sewing machine at a registered waste disposal firm or through your

local authority waste disposal facility.

- Observe the regulations currently in force. In case of doubt, consult your waste

disposal facility.

- Please dispose of all packaging materials in an environmentally friendly manner.
Keep the sewing machine's transport packaging. It may be useful for storing the

machine, but is particularly useful if you want to send the sewing machine away for

repair. Most instances of damage occur when the machines are being transported.

Guarantee

There is a three year guarantee on this sewing machine starting from the purchase date. The

device was inspected carefully and conscientiously before delivery. Please keep your receipt as

proof of purchase. In case of a guarantee complaint, please call your service centre. This is the

only way to ensure free shipment of your goods.

The guarantee scope only covers material or manufacturing defects; it does not cover wearing

parts or damage to fragile parts e.g. switches. The product is only intended for private and

not commercial use. In the event of misuse, improper handling, the use of force or any kind of

interference which was not been performed by our service office, the guarantee will lapse. This

guarantee does not limit your statutory rights.

Manufacturer

Please be aware that the following address is not a service address. Please first contact the

service office stated above.

Crown Technics GmbH
Turmstraße 4
D-78467 Konstanz
GERMANY

Service number

These Operating Instructions cannot cover all possible applications.

For more information or in case of problems not covered or not covered in sufficient detail in these

Operating Instructions, please contact the service number

1-844-543-5872

Please keep these Operating Instructions in a safe place and pass on to any future users.

Customer Service
Contact Page: www.lidl.com/contact-us

IAN315502

Содержание SNM 33 C1































Результаты поиска

Содержание SNM 33 C1

Отзывы:

Похожие инструкции для SNM 33 C1

Бренды по названию

Популярные бренды

Silvercrest SNM 33 C1, Инструкции по эксплуатации и безопасности

Результаты поиска

Содержание SNM 33 C1

Отзывы:

Похожие инструкции для SNM 33 C1

Бренды по названию

Популярные бренды