19
SND 3600 A2
GB
IE
♦
Slide the holder with the negatives and/or slides to be scanned
into the slot
3
on the device until it locks into place.
The scan motif will be displayed in the preview fi eld .
NOTICE
►
A holder that has been inserted into the device cannot be pulled
out again, it has to be pushed completely through the device.
♦
Adjust the holder, if required, until the scan motif is displayed
optimally in the preview window.
♦
If necessary, you can set the electrical balance (Balance), the
exposure (Exposure), the brightness (Brightness), the contrast
(Contrast) and the saturation (Saturation) by pressing on the
button
“Adjust”.
A settings window will be opened.
♦
Click on to increase the corresponding value and on to
decrease the corresponding value.
Use the slide controller to adjust the electrical balance (Colour
balance).
Example: If the image has a too high proportion of blue, this can be
reduced by increasing the yellow component.