■
34
│
GB
│
IE
SLXL 20 A1
AUX IN mode
CAUTION
►
Use the speaker in AUX IN mode only in dry indoor environments and with
the supplied 3 .5 mm jack cable .
You can also listen to music from a portable audio device connected via the
3 .5 mm jack cable .
♦
Make sure that the speaker is switched off .
♦
Open the protective cover .
♦
Use the 3 .5 mm jack cable to connect the audio device to the 3 .5 mm
jack socket on the speaker .
♦
Press and hold the button for about 3 seconds to turn the speaker on .
You will hear a beep and the operating/charging LED lights up blue .
♦
Start playback on the audio device and adjust the volume to a moderate
level .
♦
Then set the desired volume using the button or button on the
speaker .
♦
If you are no longer using the speaker in AUX IN mode, remove the 3 .5 mm
jack cable from the speaker and close the protective cover .
NOTE
►
If you connect a 3 .5 mm jack cable to the speaker during the playback of
audio files via
Bluetooth
®
, it will switch playback automatically to the
AUX input . The
Bluetooth
®
connection is also stopped if you connect a
3 .5 mm jack cable to the speaker .
►
In AUX IN mode, it is not possible to use the button or button to
jump to the next/previous title .
►
If the speaker stops receiving a signal while in AUX IN mode, the speaker
will switch off automatically after 10 minutes .