■
10
│
GB
│
IE
│
NI
SLR 40 A1
♦
Then roll the heating element
1
into the hair so that the strand is wrapped
around the heating element
1
and the hair clip
2
.
To do this, use the rotation function:
–
Press the left arrow button
4
to wind the hair in a clockwise direction or
the right arrow button
4
to wind it in an anticlockwise direction .
NOTE
►
Make sure that you rotate the heating element
1
in the direction of your
hair ends to prevent frizz .
♦
Wait approx . 5–12 seconds in this position . Use the timer:
–
press the button
7
. 5 seconds is displayed by default .
–
Press the "+"
8
or "–"
9
buttons to adjust the time . You can choose 5,
8 or 12 seconds .
–
After the set time has elapsed, you will hear three beeps .
NOTE
►
Thick and/or long hair generally requires more time than short and/or fine
hair .
►
If you are unsure, start with a lower temperature and a shorter time and
increase them until you find the ideal time period for you .
♦
Unwind the heating element
1
from the hair strand and release the hair
clip
2
.
♦
Proceed with the other strands in the same way .
♦
Allow the curls to cool down before you continue styling the hair .
NOTE
►
When you press the "RESET" button
5
, the appliance rotates anticlockwise
from whatever position it is in to the starting position so that the hair clip
2
is facing upwards again .
►
If you want to put down the appliance at any time during use, simply fold
out the stand
3
on the bottom of the appliance .
