SLE 280 A2
GB
│
MT
│
37
■
Handling and operation
In this section, you will receive important information pertaining to appliance
handling and operation.
Switching the appliance on/off
♦
Press the STAND-BY button
21
to switch the appliance on. The OPERATION
LED
20
lights up.
♦
Press the STAND-BY button
21
to switch the appliance off. The OPERATION
LED
20
goes out.
NOTE
►
The appliance starts in the mode last selected.
►
After a power failure, if the appliance is disconnected from the mains, or
after switching off owing to the overheating guard, the appliance starts in
the mode last selected.
♦
If a timer has been programmed, the appliance switches off definitively
upon lapse of the time specified (1-24 hour/s).
♦
If the relative humidity value has been defined in the TARGET HUMIDITY
programme, the appliance switches off once the value has been attained.
If the value is exceeded, the appliance switches on again.
♦
The appliance switches off if the water tank
5
is full or has been removed.
If wrongly positioned, or if the water tank
5
has been removed, the TANK
FULL LED
19
flashes and an audible signal is emitted if the appliance is
switched on.
NOTE
►
The water tank
5
must be fully inserted in the appliance; otherwise, the
condensate cannot be collected properly.
Air outlet valve
Always open the air outlet valve
, regardless of the appliance's respective pro-
gramme. If the valve
is not opened, the overheating guard switches the appli-
ance off after some time for approx. 3 minutes.
Содержание SLE 280 A2
Страница 3: ......
Страница 29: ...SLE 280 A2 26 IT MT ...
Страница 79: ... 76 DE AT CH SLE 280 A2 ...