- 8 -
Alarm function
Symbol in the display
r
Acoustic signal
Radio
Switched off
no symbol
1. In automatic mode press the button AL1/
VOL. +
g
(or AL2/VOL. –
f
). In the
display
r
the last set alarm time and the
symbol for the type of alarm blink for 10
seconds.
2. Press the buttons UP
/DOWN
1(
/
l
to set the desired alarm time.
3. Press the button AL1/VOL. +
g
(or AL2/
VOL. –
f
) repeatedly until the desired
alarm function (see the table above) is
indicated in the display
r
.
4. Repeatedly press the button TIMER
s
to
set the weekdays on which you require the
alarm function: You can select between
"workdays" (Mo, Tu, We, Th, Fr), "week
-
ends" (Su, Sa) and "every day" (Su, Mo,
Tu, We, Th, Fr, Sa). Thereby, orientate
yourself on the weekday indicator in the
display
r
:
Mo
= Monday
Tu
= Tuesday
We
= Wednesday
Th
= Thursday
Fr
= Friday
Sa
= Saturday
Su
= Sunday.
5. If you hold the button TIMER
s
pressed
down for 2 seconds, you can also,
through repeated brief pressing of the
TIMER
s
button, select a specific week
-
day (e.g. only "We"). The selected setting
is indicated in the display
r
.
6. To return to the selection of workdays,
weekends or whole weeks, once again
hold the button TIMER
s
pressed down
for 2 seconds.
7. After 10 seconds the blinking in the
display stops and your input is saved.
The appliance then returns to automatic
modus.
When the alarm signal sounds...
• and the alarm function "Radio" has been
selected, the radio plays for one hour
at a pre-defined alarm volume. To finish
press any button , even if the button lock is
switched on.
• and the alarm function "Signaltones" has
been selected, the signal tone sounds for
10 minutes, with an increasing volume. To
finish press any button , even if the button
lock is switched on.
The Reminder function
The appliance can remind you of a date that
you have set with the reminder function. In
this case, the acoustic reminder alarm will
sound for 10 minutes at the set hour. In addi
-
tion, the SDA indicator flashes in the display
r
.
Press any button to stop the reminder alarm,
even if the button lock is switched on.
Radio operation
For radio reception, completely unwind the
wire aerial
e
and, with the radio switched
on, determine the most favourable position
-
ing for it. The appliance has a built-in ferrite
aerial for the reception of MW transmitters.
Should the MW reception be insufficient,
please turn the appliance towards a more
favourable direction.
Switching the radio on and off
1.
To switch the radio function on, press the
button ON/AOT/OFF
2!
. In the display
r
the currently selected frequency is
shown.
2.
Press the button ON/AOT/OFF
2!
once
again to switch the radio off and return
the appliance to the automatic modus.
Содержание SKRP 1000 A1
Страница 2: ...SKRP 1000 A1 ...
Страница 14: ... 12 ...
Страница 50: ... 48 ...
Страница 62: ... 60 ...