Silvercrest SKA 1000 A1, Руководство по эксплуатации, Страница: 27 / 35

■ 24
│
GB SKA 1000 A1
4) Rinse the filter holder . and lid of the vacuum flask with clean water.
Place the filter holder
.
back in the appliance. Screw the lid back on the
vacuum flask .
5) Fill the water tank
!
with water. To empty it again, carefully turn over the
appliance over a sink and pour out the water. When you turn the appliance
around again, water will escape from the appliance. Hold the appliance
over the sink until no more water escapes. Then carefully dry the appliance.
6) Fill the water tank ! with water up to the MAX mark.
7) Close the appliance lid .
8) Place the lid back on the vacuum flask . Place the vacuum flask in
the appliance.
9) Press the AN/AUS button . The display
3
will read BREW and the red
control lamp BRÜHVORGANG - will light up. Wait until the brewing process
finishes and you hear 6 acoustic signals.
10) Empty the vacuum flask and rinse it with clean water again.
11) Wait until the appliance has cooled down, then rinse the filter holder
.
with
clean water again.
The appliance is now ready for use.
Making coffee
Inserting ground coffee
1) Open the appliance lid . The filter holder
.
is already inserted.
2) Take a paper coffee filter (size 1 x 4) and fold its sides over. Insert the paper
filter into the filter holder . .
3) Use the measuring spoon to insert ground coffee into the filter.
NOTE
► Use approximately one flat measuring spoon of ground coffee for each
cup of filter coffee. If the filter coffee is too strong, reduce the amount of
ground coffee per cup.