Silvercrest SIM 13 B2, Руководство по эксплуатации, Страница: 8 / 59

- 5 -
Equipping the massage head with
accessories
Select, according to the application requirement, an
accessory (
0 , q , w , e , r , t ) for the massage:
The roller accessory 0 :
Stimulates the blood circulation. Guide the roller
accessory back and forth over the whole of the
body.
The nub accessory q
:
The 21 nubs are suitable for deep massage and
large muscle groups.
The surface accessory
w
:
Use this accessory on the whole body to relieve
muscle pain and tensions.
The Shiatsu accessory
e
:
The Shiatsu accessory simulates the finger posture
of a masseur and is suitable for deep massage.
The knead-massage accessory
r
:
This accessory is suitable for kneading simulation
and deep massage.
The accessory for exacting massage t : Use
this accessory for the massage of individual muscle
groups.
1. Release a possibly fitted accessory from the
massage head
1
, in that you hold the grip
cavity
2
and pull it off.
Note:
The roller accessory
0
does not have a recessed
grip
2
. To pull it off, you can take hold of the roller
on the sides.
2. Place the accessory (
0
,
q
,
w
,
e
,
r
,
t
) of
your choice on the massage head
1
and pay
attention that the round curbs of the massage
head
1 and the accessory ( 0 , q , w , e , r ,
t ) lie one on top of the other.
3. Push the accessory ( 0 , q , w , e , r , t ) onto
º38
the massage head
1
then check to make sure that
it is firmly fixed.
Usage
• Insert the power plug into a wall power socket.
Switching on
• To switch on the Infrared lamp 9 slide the
switch Infrared 4 into the position "I".
• Slide the switch Massage
5
into the position "I"
for normal vibration.
• For a stronger vibration slide the switch Massa-
ge
5
into the position "II".
ATTENTION!
After an extended heating-up of the infrared lamp 9
without bodily contact, the temperature of the lamp
can be perceived as unpleasantly high! Always
check the temperature of the infrared lamp
9
with
the tip of a finger before making contact with the
body itself. A temperature that is too high can be re-
duced by switching the infrared lamp
9
off for a
short period.
Massage
• Hold the Infrared Massage Appliance by the
grip
7
and, dependant on the application,
place the infrared lamp
9
or the massage
head
1
against the skin.
• Guide the infrared lamp
9
or the massage
head 1 in circular or straight movements slowly
over the skin.
• Massage without applying undue pressure.
• To achieve an optimal effect, try to keep the skin
taut.
• Always start the massage at the position furthest
from the heart and then slowly work towards the
heart.