Silvercrest SHTD 2200D A1, Руководство по эксплуатации, Страница: 11 / 28

■ 8 │
GB
│
IE
│
NI
SHTD 2200D A1
■ If you wish to dry your hair especially gently, or create a so-called “air-dried
wave”, then use the finger diffusor
8
. Start by removing the styling jet
1
with a downwards snapping motion .
Fit the finger diffusor
8
by pushing it with light pressure onto the hair dryer
so that it snaps into place and sits evenly on the hair dryer .If you no longer
require the finger diffusor
8
, wait until the appliance has cooled down and
pull it off with a downwards snapping motion:
■ Before you comb your hair out, allow it to cool so that the shaping and styling
can retain its form .
■ You can use the cooling level button
7
d
to cool down your hair down .
Cleaning
RISK OF ELECTRIC SHOCK
► Always remove the mains plug from the socket before you clean the appliance .
► Under no circumstances may you immerse the appliance in water or other
liquids when cleaning it!
► After being cleaned, the hair dryer must be completely dry before using it
again .
WARNING - RISK OF PHYSICAL INJURY!
► Allow the appliance to cool sufficiently before cleaning it .
CAUTION - PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents . They could damage
the surface .
Cleaning the housing
■ Use a soft cloth lightly moistened with a mild soap solution to clean the housing
and attachments .