7
SHSS 12 B2
GB
Operation
ATTENTION! MATERIAL DAMAGE!
►
The suction opening must always be open and
unblocked. Blockages lead to overheating and
damage to the motor.
►
Do not vacuum shag pile carpet with the fl oor
nozzle. The rotary brush
r
can get caught in
the carpet and block!
NOTE
►
Make certain that the dust fi lter
6
and the
coarse fi lter
7
are always inserted before
using the appliance.
►
As soon as the suction power of the appliance
begins to diminish noticeably, connect the
appliance to the charger
i
.
Using the hand element with the
handle
1) Insert the hand element
4
into the hand
element recess
e
as described in the chapter
"Assembly/disassembly".
2) Fold out the grip
0
by pressing the "Grip"
release
q
and at the same time pulling the
grip
0
upwards.
3) Switch on the appliance using the on/off
switch
9
. The LED lamp
t
on the fl oor nozzle
will illuminate and the rotary brush
r
starts
turning.
4) Guide the fl oor nozzle over the area to be
vacuumed. Hold the grip
0
so that the fl oor
nozzle moves smoothly over the fl oor.
5) Press the on/off switch
9
when you have
fi nished vacuuming. The rotary brush
r
stops
and the LED lamp
t
goes out.
Using the hand element
1) Remove the hand element
4
from the hand
element recess
e
as described in the chapter
"Assembly/disassembly".
2) If required, attach the crevice tool
u
or the
brush nozzle
z
.
3) Set the on/off switch
2
to start vacuuming the
desired areas.
4) When you have fi nished vacuuming, press the
on/off switch
2
again.
Cleaning and care
WARNING! RISK OF INJURY!
►
Always disconnect the charger
i
from the
mains socket and remove the barrel jack
o
from the charging socket
s
on the cradle
d
before cleaning the cradle
d
.
►
Always remove the hand element
4
from the
hand element recess
e
on the handle before
cleaning the hand element
4
, the handle or
the rotary brush
r
.
To achieve the best results, empty the dirt container
8
and clean the dust fi lter
6
after every use.
ATTENTION! MATERIAL DAMAGE!
►
Do not use abrasive or aggressive cleaning
materials. These could damage the surface
of the appliance!
NOTE
►
The LED lamp
t
is maintenance-free.
The LEDs cannot be changed.
IB_100116_SHSS12B2_LB4.indb 7
19.09.14 13:49
Содержание SHSS 12 B2
Страница 3: ...A B C ...