SBTF 10 D4
GB
│
IE
│
43
■
Muting the microphone
You can temporarily mute the microphone during a call
so that the other caller cannot hear you.
♦
Press the
button . You will hear a beep and the
operating LED lights up orange. The microphone is
now muted.
♦
Press the
button again to reactivate the sound.
You will hear a beep and the operating/charging LED
lights up blue every 6 seconds. The microphone is
now reactivated.
Call function
♦
Use your mobile phone to make a call in the usual way.
♦
To redial the last used number, press the
button
twice in quick succession. You will hear a beep.
♦
To activate voice dialling, press the
button once
briefly. You will hear a beep.
NOTE
►
Voice dialling is only available with mobile phones
which support this function. For more information on
voice dialling, refer to the instruction manual for your
mobile phone.
Resetting the hands-free set
The hands-free set can be paired with up to 8 mobile
phones. To delete the pairing list and reset the hands-free set
to the factory defaults, proceed as follows:
♦
Switch the hands-free set off and on again.
♦
Press and hold the and buttons simultane-
ously for about 10 seconds. The operating/charging
LED flashes blue and you will hear a series of
beeps. The pairing list is deleted and the hands-free set
is reset to the factory defaults.
♦
Afterwards, the operating LED flashes alternately
blue and orange. The hands-free set is now in pairing
mode and can be paired with a new mobile phone.
Содержание SBTF 10 D4
Страница 10: ......