Silvercrest SBMS 30 A1, Инструкции по эксплуатации и безопасности

Страница: 20 / 24

18 GB/IE/NI
Pair your device with the product .
Play music via your device (if it supports
A2DP) .
Use the supplied remote control to control
play (if it supports AVRCP) .
Button Description
15
Press button to pause playback .
30
15
Press button to resume playback
42
/
29
Press button to skip to a track .
˜
FM operation
˜
Auto scan and save preset
stations
Fully unwind the FM aerial
48
. Extend the FM
aerial and place it in the position that offers the
best reception .
Press SOURCE
7
or TUNER
21
to select
the FM mode .
Press and hold PROG
44
to activate
automatic programming . All available
stations are programmed in the order of
waveband reception strength .
The first programmed radio station is played
automatically .
˜
Tune to a preset radio station
Press ALBUM / PRESET / ,
27
to select
the desired preset number .
˜
Tuning in a station
Press and hold /
27
. The frequency
changes down or up automatically until a
station is found .
Press /
27
repeatedly until you find
the desired station .
If reception is poor, try to adjust the position
of the FM aerial
48
or try to move the
product to another location .
˜
Presetting stations manually
You can preset up to 20 FM stations .
Tune in the desired station . Press PROG
44
to confirm .
Press ALBUM / PRESET / /
27
to
select the preset number . Press
PROG
44
to confirm .
Repeat above steps for each station you
want to store in the memory with a preset
number .
˜
For better reception
Fully unwind the FM aerial
48
. Extend the
FM aerial and place it in the position that
offers the best reception quality .
Press
ST
/
MONO
22
to toggle between
stereo and mono mode . This is helpful when
receiving poor signal reception .
˜
Showing RBDS information
If you tune to a RBDS station, press
INFO
26
repeatedly to scroll through the
following information: Station Text / Station
Name / Program Type / RDS Clock .
˜
Cleaning
Before cleaning: Switch the product off and
remove all plugs!
No acid, chafing or solvent cleaning agents
should be used or the product can be
damaged .
Only clean the outside of the product using
a soft, dry cloth!
For persistent soiling, a mild cleaning agent
can be used .