15
US-EN
Using the product
Press and hold the
button 8 until the LED 5 flashes white slowly
and a signal tone sequence sounds . The product will now attempt to
connect to the playback device (e .g . smartphone or computer) .
Establishing a Bluetooth
®
connection:
Remove all plugs from the AUX-in jack 1 before you attempt to establish
a Bluetooth
®
connection .
Switch on the playback device and make sures its Bluetooth
®
mode is on .
On the product press and hold the button 6 for 2 seconds until
the LED 5 flashes white slowly and a signal tone sequence sounds .
The product will now attempt to connect to the playback device (e .g .
smartphone or computer) .
The product identification on the playback device will be “SBL TW10
A1“ . On the playback device “ACCEPT“ the connection . Please note the
requirements of the software on the playback device .
Once the connection is made the LED 5 flashes white briefly once every
five seconds and a signal tone sequence sounds .
The maximum range of the connection is 32 .8 ft/10 m, but this may be
reduced due to the geometry of the space (obstructing furniture, walls,
etc .) .
The playback device must support Bluetooth
®
standard 5 .0 otherwise you
may not be able to use all the functions .
Functions of the buttons
Start a playlist on your playback device .
The product has 5 buttons and these control the following functions:
Button
Function
‒ Press and hold for 2 seconds to switch the product on or off .
‒ Press briefly during playback to pause or continue
playback .
