Silvercrest SAS 7.4 LI B3, Руководство по эксплуатации

Страница: 14 / 46

GB
│
IE
│
NI
│
CY
│ 11 ■ SAS 7.4 LI B3
Cleaning
To achieve the best results, empty the dirt container
q
and clean the dust filter
0
after every use.
CAUTION! MATERIAL DAMAGE!
► Do not use aggressive, chemical or abrasive cleaning agents. These could
damage the outer surfaces of the appliance.
1) To open the dirt container
q
, press the release button
8
and remove the
dirt container
q
.
2) Remove the dust filter
0
from the dirt container
q
.
3) Empty the dirt container
q
.
4) Pull the dust filter bag
9
with its holder out of the dust filter
0
.
5) Rinse the dust filter bag
9
out in cold water and wait until it is completely
dry before reinserting it into the dust filter
0
. Do not dry it with hot air.
6) Reinsert the dust filter
0
into the dirt container
q
. When doing so, ensure
that the dust filter
0
is seated squarely and that the rubber lip seals the dirt
container
q
.
7) Replace the dirt container
q
on the motor unit
w
again:
–
Push the plastic tab on the underside of the handheld vacuum cleaner
into the recess on the dirt container
q
.
–
Press the release button
8
and push the dirt container
q
onto the motor
unit
w
at the same time.
–
Let go of the release button
8
so that the restraint engages in the
recess. The dirt container
q
is now firmly seated on the motor unit
w
.
8) Clean the housing and both nozzles with a lightly moistened cloth. For stubborn
soiling use a mild detergent on the cloth.
9) Dry all parts thoroughly before using the appliance again or storing it.
IB_337627_SAS7.4LIB3_LB6_GB-IE-NI-CY.indb 11 06.03.2020 13:00:02