- 10 -
13. Initial operation of the DVD player
After you have …
•
placed the DVD player in a suitable location
•
connected the DVD player, if desired, to a television by one of the
designated connection options
•
connected the DVD player, if desired, to a HiFi system and/or a receiver
•
made the remote control ready for operation by inserting the batteries
•
and know how to activate and operate the OSD menu with the remote
control
… the DVD player is ready for operation.
13.1 Inserting the DVD
To play a disc with the DVD player:
•
Make sure that the DVD player is ready for operation.
•
Switch the DVD player on.
When the DVD player and other potentially connected devices (i.e. an audio
component) are ready for operation and are switched on you will now see
the Silvercrest logo in the display.
If no disc is inserted into the DVD player's disc tray:
No Disc
will appear in the display.
•
Open the disc tray by pressing the button "Open/Close" on the remote
control or on the front panel of the DVD player.
Open
will appear in
the display.
•
Insert the disc in the disc tray with the inscribed/labled side up.
For twin-sided discs: The side you would like to play must face down.
•
After you have inserted the disc press the button
"Open/Close" on
the remote control or on the front panel of the DVD player again to close
the disc tray.
•
The contents of the disc will now be loaded; this may take a few seconds.
In the meantime
Loading
will appear in the display.
13.2 Inserting memory cards/USB memory sticks with
MP3/WMA/ DivX/JPEG data
Note:
The DVD-Player always starts in DVD mode. In order to read memory
cards press the button
USB/CARD
several times on the remote control or
the button
USB/SD/MMC CARD
on the device until the message
READ
CARD
appears in the display. The DVD player recognizes the data
formats JPEG, MP3, WMA und MPEG4 (DivX).
In order to insert memory cards of the types SD and MMC into the DVD player:
•
Make sure that the DVD player is ready for operation.
•
Switch the DVD player on.
When the DVD player is switched on and ready for operation you will see
the Silvercrest logo in the display.
If no disc is inserted into the DVD player's disc tray:
No Disc
will appear in
the display.
•
Slide the memory card into the memory card slot. Then proceed with
the following steps depending on the type of memory card that you
want the device to read.
Warning!
Always make sure that you insert memory cards into the memory card
slot as described hereafter! Under no circumstances bend or buckle the
memory card when inserting into the memory card slot! Slide the memory
card up to the stop in the memory card slot, with a light pressure.
Allow the memory card to slide in without force:
•
Check to make sure that the memory card is one that the DVD player is
capable of reading.
Do not attempt to insert memory cards of another type in the memory
card slot!
•
Make sure that you have inserted the memory card into the memory
card slot in the correct manner.
•
Under no circumstances attempt to force the memory card into the memory
card slot!
Otherwise the DVD player, memory card and the data on the memory card
could be damaged!
Supported memory card types and capacities
Memory cards of the types SD (1 GB) and MMC (1 GB) can be played
back.
Supported file structure and file formats
–
2 file levels are supported
–
The total file count should be not more than 10
(max. 5 files on each of the 2 file levels)
–
A max. of 100 files are supported on the memory media
–
Files with mixed file formats are not supported
–
A JPEG file larger than 1 MB can lead to faulty images
IB_KH6502_EN_LB3.qxd 07.12.2007 8:46 Uhr Seite 10
