Adjusting the time functions
a) Programming the alarm time
• Press the button “ALARM ON/OFF”
.
In the display all positions
blink and the indicator “
AL
” (Alarm time) appears.
• Press once again on the button “ALARM ON/OFF”
, until only
the figure for the hours (e.g. “
1: A
”) is shown in the display and, at
the same time, the indicator “
AL
” (Alarm time).
• Press repeatedly on the button “SET”
until the correct hour figure
is shown in the display, e.g. “
7: A
”. The letter “
A
” behind the figure
means “AM” (forenoon), “
P
” means “PM” (afternoon).
• Press again on the “ALARM ON/OFF”
button, until only the figu-
res for the minutes are shown in the display (e.g. “
:00
”) and, at the
same time, the indicator “
AL
” (Alarm time).
• Press repeatedly on the button “SET”
until the correct minute figu-
re has been programmed in, e.g. “
:30
”.
b) Setting the date
• Press again on the “ALARM ON/OFF”
button until only the
number for the month is shown in the display, e.g. “
1
”.
• Press repeatedly on the button “SET”
, until the month has been
programmed in, e.g. “
12
”.
• Press again on the “ALARM ON/OFF”
button until only the
number for the day is shown in the display, e.g “
1
”.
• Press repeatedly on the button “SET”
, until the date has been
programmed in, e.g. “
31
”.
- 7 -
IB_KH2411_DT26291_LB4B 25.03.2009 15:16 Uhr Seite 7
