- 2 -
CLOCK RADIO
KH 2189
Intended use
The intended uses for this device are the reception
of FM / AM radio transmissions and as a wakeup
alarm, using signal tones or the radio itself.
This device is intended for use only in domestic settings.
It is not suitable for use in commercial or industrial
applications.
Technical data
This device complies with the fundamental require-
ments and other relevant stipulations of the EMC
Directive 2004/108/EC, as well as the Guidelines
of the Low Voltage Directive 2006/95/EC.
Mains voltage:
220 - 240 V ~ / 50 Hz
Back-up power :
9 V Block battery
Type 6LR61/6F22
(Not supplied)
Power consumption:
5 W
Power consumption
Standby:
max. 3 W
Protection class:
II /
Radio frequency range:
FM (VHF) :
87,5
–
108 MHz
AM (MW) :
526,5
–
1606,5 kHz
The technical capabilities of this device make possible
an adjustable frequency range that lies beyond the
permitted frequency ranges of 87,5 – 108 MHz and
526,5 – 1606,5 kHz. In some countries, different
national regulations may apply in regard to the assig-
ned radio frequency ranges. Note that information
received from transmissions outside the assigned
radio frequency ranges may not be exploited, passed
on to third parties or otherwise improperly misused.
Alarm functions :
Radio, alarm signal
Operating temperature
range:
+5° - +35°C
Humidity:
5 — 90%
(no condensation)
Dimensions:
15,2 x 7,2 x 8,5 cm
Weight :.
ca. 415 g
Delivery Contents
Radio Alarm
Operating Instructions
Safety instructions
• This device is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
device is to be used.
• Children should be supervised to ensure that
they do not play with the device.
• Keep batteries away from children. Children can
put batteries into their mouths and swallow them.
If a battery is swallowed medical assistance must
be sought IMMEDIATELY.
To avoid potentially fatal electric
shocks:
• Connect the device only to correctly installed
and earthed mains sockets. Ensure that the rating
of the local power supply tallies completely with
the details given on the rating plate of the device.
• Make sure that the power cable never becomes
wet or damp during operation. Lay the cable such
that it cannot be trapped or otherwise damaged.
IB_KH2189_DT35278_LB6 30.07.2009 8:54 Uhr Seite 2
Содержание KH 2189
Страница 10: ......