9
Handling and operation
KH 2131
GB
IE
Connecting the transmitter
Insert the jackplug of the cinchplug - jackplug cable
22
in the AV1 IN
socket
8
of the transmitter.
Connect the cinch plug of the cinchplug - jackplug cable
22
to the signal
source, for example, a DVD player. Pay heed to the colour coding.
If the signal source makes the output signals available to you via a Scart
output, use also the Scart to cinchplug adapter OUT (Transmitter)
24
.
If need be, you can connect a second signal source to the transmitter.
For this, use the socket AV2 IN
9
.
NOTICE
If, despite an occupied A/V output, you wish to additionally connect the
►
used signal source to a TV, connect the TV with the transmitter via the
socket TO TV
7
. To do this, use either one of the supplied cinchplug -
jackplug cables
22
, or an identical cable from a dealer (see Figure
Connection example transmitter).
Connect the infrared transmission diode cable
25
to the socket IR
6
of the
transmitter.
Aim one of the three transmitter diodes at the device to be remotely controlled.
Attach the transmitter diode at an appropriate location using the supplied
double-sided adhesive pads. The transmitting diode should be affi xed
immediately adjacent to the IR receiving diode on your device (see Fig.
Connection example Transmitter).
Connect one of the power adapters to the DC IN
10
socket of the transmitter
and then plug it into a properly installed mains power socket.
Unfold the transmission antenna
and point it in the direction of the receiver.
Connecting the receiver
Connect the video output
18
and the audio outputs
19
to the target device,
e.g. a television. For this, use the supplied Cinch to Cinch cable
27
.
Pay heed to the colour coding.
If the target device has a Scart input, use additionally the Scart - Cinch
adapter IN (Receiver)
23
.
Connect one of the power adapters to the DC IN
20
socket of the receiver
and then plug it into a properly installed mains power socket.
Unfold the transmission antenna
13
and point it in the direction of the transmitter.