Silvercrest Chopper, Руководство по эксплуатации

Страница: 11 / 18

SSW 400 A1 - A
■ 8
│
GB
│
IE
│
NI
5) Place the hand element of the blender into the hand element
socket
1
so that the arrow marking on the hand element
socket
1
is pointing towards the symbol on the hand
element of the blender .
6) Turn the hand element of the blender until the marking on the
hand element socket
1
is pointing towards the symbol on
the hand element .
7) Insert the plug into the mains power socket . The light ring on
the hand blender lights up .
8) Set the desired speed level using the speed control on the
hand blender . Turn the speed control towards MAX if you
want to increase the speed; turn the speed control towards
MIN if you want to decrease the speed .
9) Hold the bowl
5
firmly with one hand .
10) Press and hold down the start button of the hand blender .
Keep an eye on progress .
11) As soon as you are satisfied with result, release the start
button . Do not remove the lid
2
with the hand element of
the blender from the bowl
5
until the motor has come to a
complete standstill .
NOTE
► Particularly hard or bulky foods should be cut into small
pieces (approx . 1–2 cm) before processing . Otherwise,
the motor unit could block .
Use a pulsing processing method when working with hard
foods .
12) Remove the power plug from the socket .
IB_Zusatz_282546_GB.indd 8 15.02.17 09:04