Silvercrest 75784, Руководство по эксплуатации

Страница: 45 / 52

42
Handling and operation
SWW 1500 A1
GB
Handling and operation
NOTICE
► All functions can be switched both with the buttons on the device and with
the remote control.
In this section you receive important information for the handling and operation
of the device.
Switching the device on and off
With the main switch POWER 6 the device is completely disconnected from the
mains power.
♦ Firstly switch the main switch POWER 6 on and/or lastly off when you are
no longer operating the device.
Heating operation
♦ Activate the main switch POWER 6 to switch the device on. In the display
appears briefl y and subsequently the current device temperature in the
area of the integrated temperature sensor. The device is now in standby mode.
In the display
the symbol for the frost protection function lights up.
♦ Press the button POWER/MODE 3 and/or
12
. The device switches on
with the low heat output (LOW). In the display appears .
♦ Press the button POWER/MODE 3 and/or 12 again to set the high heat
output (HIGH). In the display appears .
Setting the nominal temperature
♦ Press the button POWER/MODE 3 and/or 12 repeatedly until, in the
display , the indicator LOW appears and the nominal temperature blinks
for 5 seconds.
♦ Whilst the nominal temperature is blinking in the display press one of
the b/- 4 and/or
13
to set the desired nominal temperature from
15°C to 35°C. Each press of the /- 4 and/or
13
increases or
reduces the nominal temperature by 1°C. Wait approx. 5 seconds until the
nominal temperature is continuously shown in the display
. The setting is
now saved and the heating element 9 switches on.
♦ Press the button POWER/MODE 3 and/or
12
again if you want to set the
high heat output (HIGH). In the display appears the indicator HIGH and
the nominal temperature blinks for 5 seconds.
Buch_75784_LB_FR.indb 42 Buch_75784_LB_FR.indb 42 28.06.12 15:58 28.06.12 15:58