Silvercrest 395060 2104, Руководство по эксплуатации

Страница: 10 / 204

SFEE 800 A1
GB
│
IE
│ 7 ■
Assembling and operating the appliance
■ Before using the appliance for the first time, clean all component parts
thoroughly as described in the section “Cleaning and care” .
■ Select a safe and secure positioning for the juicer . For optimal handling we
recommend that the appliance is positioned with the power cable
8
running
from the rear of the appliance to the wall socket . All operating elements can
now be directly and easily handled:
–
the On/Off switch
9
at the front,
–
the container for fruit and vegetable pulp
q
on the left,
–
the juice outlet
6
on the right .
WARNING! RISK OF INJURY!
► Ensure that the appliance is switched off and the plug
8
removed from the
wall socket before assembling the appliance .
1) Place the juice tank
5
on the appliance base
7
, so that the three catches
and the juice outlet
6
grip into in the recesses .
2) Place the filter
w
on the drive shaft
e
and press it down so that it audibly
clicks into place . Ensure that it is firmly seated before continuing with the
assembly .
3) Slide the container for fruit and vegetable pulp
q
from below under the
outlet (see fold-out page) .
4) Place the lid
3
onto the juice tank
5
, so that the feed tube
2
is sitting
above the blades of the filter
w
.
5) Ensure that the lid
3
is sitting firmly in the recess on the juice tank
5
.
Lift the clamps
4
and clip them into the notches on the lid
3
.
6) Press the lower part of the clamps
4
against the appliance until they click
into place .
7) Push the foam separator
z
into the juice collector
t
and put the lid on .
Place the separate juice collector
t
next to the appliance so that the juice
outlet
6
protrudes into the separate juice collector
t
.
8) Insert the plug
8
into a mains power socket .