Silvercrest 391896-2201, Руководство по эксплуатации, Страница: 15 / 240

SMGB A1 ■ 12
│
GB
│
IE
Switching the appliance on/off and selecting intensity
1) Switch the appliance on by moving the main switch
6
on the underside of
the handle
4
to the ON position.
9 The ring display
5
lights up green.
2) Press the button
3
to start the appliance.
9 The display
2
shows the intensity level .
The appliance starts on intensity level .
3) To increase the intensity level, press the button
3
briefly.
9
Each press increases the intensity by one level. This is shown on the display
2
.
NOTE
► After reaching the highest intensity level , if you press the button
3
again, the appliance stops working and switches into standby mode.
4) Massage the desired body part by gently moving the attachment back and
forth over the muscle area.
NOTE
► Do not apply too much pressure, otherwise the appliance will automatically
switch off to protect the motor from a possible overload. If this safety device
has been triggered,
(
will appear on the display
2
.
You need to restart the appliance.
5) After you have finished using the appliance, switch it off by pressing and
holding the button
3
for around 2 seconds and then move the main
switch
6
to the OFF position.
NOTE
► The appliance is equipped with an automatic switch-off to prevent over-
heating. The appliance switches off automatically after 15 minutes of
continuous operation. Allow the appliance to cool down for at least
15 minutes before using it again.