Silvercrest 384661 2107, Инструкции по эксплуатации и безопасности

Страница: 12 / 34

11 GB/IE/NI/CY
No action is needed from users
to shift the product between 50
and 60 Hz . The product adapts
itself for both 50 and 60 Hz .
Cleaning and storage
The drive unit
[ 15]
and the whisk
holder
[ 13]
shall not be exposed
to any dripping or splashing
water .
Refer to the “Cleaning and
care” section for instructions on
how to clean the product .
˜
Before first use
Remove all the packaging materials .
Clean the product (see “Cleaning and care”) .
˜
Operation
˜
Assembling accessories
(ill . B)
Put the desired accessory (
[ 6] [ 13]
or
[ 14]
) on
the drive unit
[ 15]
.
on the accessory has to align with on
the drive unit .
Turn the accessory until aligns with .
Dismount all the accessories in reverse order .
˜
Turning the product on/off
m
WARNING:
The product has an initial
rotary impulse . Hold the product firmly during
operation .
The speed regulator
[ 2]
can be turned
steplessly to regulate the speed . Turn the
beam of the speed regulator to the desired
adjustment:
Speed regulator
[ 2]
Speed scale
[ 3]
(Highest) (Lowest)
Connect the power plug
[ 1]
to a suitable
mains socket .
Press and
hold button
Setting
[ 4]
Speed according to speed
regulator
[ 2]
setting
TURBO
[ 5]
Highest speed
Turning off the product: Release the pressed
button (
[ 4]
or
[ 5]
) .
NOTES:
Let the product rest at least 2 minutes
between cycles (see Max. time in the
following table) .
After 5 continuous operation cycles: Let the
product cool to the room temperature before
reusing it .
The speed can also be changed while the
product is operating .