Silvercrest 377153 2110, Руководство по эксплуатации

Страница: 11 / 150

SDRB 1000 B1
■ 8 │
GB
│
IE
Use on clothing
♦ Hang the creased piece of clothing onto a coat
hanger .
♦ Gently stretch the item with one hand and hold
it, then apply steam from top to bottom . Com-
bine steam with the clothes brush
r
for gentle
removal of all creases .
♦ Gently apply pressure with the clothes brush
r
and move the appliance over the piece of cloth-
ing from top to bottom . You can press the steam
burst button
8
at brief intervals .
NOTE
► Only repeat pressing the steam burst button
8
until the heat-up indicator lamp
5
lights up or
water drips from the ironing sole
0
. Wait until
the heat-up indicator lamp
5
goes out before
initiating another burst of steam .
♦ If the heat-up indicator lamp
5
lights up during
operation, do not press the steam blast button
8
again . Wait a few seconds until the heat-up
indicator lamp
5
goes out before pressing the
steam blast button
8
again .
NOTE
► If you press the steam burst button
8
while the
heat-up indicator lamp
5
is illuminated, the
appliance will produce condensation instead
of steam, and water will drip from the ironing
sole
0
.
♦ Allow treated clothes to cool down on a coat
hanger before wearing them .
Use on curtains and upholstery
♦ You can remove creases and wrinkles from
draperies by hanging them on a rail .
♦ Simply adhere to the instructions under “ Use on
clothing ” .
♦ Always carry out a test treatment on an invisible
patch of the item .
♦ If you are using the appliance horizontally, turn
it vertical every now and then to produce the
greatest possible amount of steam .
Lint brush
♦ To remove lint, string and hair, slowly guide the
red lint brush
e
over your clothes from left to
right .
♦ Moving the lint brush
e
over scrap fabric or
similar materials in the opposite direction (i .e .,
from right to left) will clean the brush .
Ironing function
♦ Remove the brush extension
w
from the ap-
pliance (see “ Attaching/removing the brush
extension ”) .
♦ The appliance must be connected to correctly
installed and earthed mains power sockets only .
♦ Set the temperature control
3
in accordance
with the international care symbols (laundry
label) or the type of fabric . The heat-up indicator
lamp
5
lights up . As soon as the selected tem-
perature has been reached, the heat-up indicator
lamp
5
goes out .
Laundry
label
Type of
fabric
Temperature
control
3
Synthetic fibre
e .g . viscose,
polyester
•
(low
temperature)
Silk, wool
••
(medium
temperature)
cotton,
linen
•••
(high
Temperature)
NOTE
► If in doubt, start with a low temperature and
gradually increase it . For sensitive fabric, we
recommend that you iron an invisible patch
(inside of the seam) first to ensure that the
ironing process does not cause damage .