GB
│
IE
│
13
■
SLE 200 A1
Selecting programmes
The appliance has 2 programmes:
▯
DEHUMIDIFICATION (
)
▯
FAN (
)
♦
Press the button
t
repeatedly to select the desired programme. The
selected programme flashes for approx. 5 seconds and is then shown
permanently on the display
w
.
DEHUMIDIFICATION
This programme allows you to set the desired relative air humidity level that
should be achieved.
♦
Press the button
r
to set the desired relative humidity in 5% increments
between 30% and 80%. The set value flashes for approx. 5 seconds on the
display
w
and then the current programme (
) is shown again.
You also have the option to select the
setting if you want to set the relative
humidity below 30%. This setting allows you to achieve a very low relative
humidity as the dehumidification runs permanently.
♦
Press the button
r
repeatedly until
is shown on the display
w
.
NOTE
►
Note that the values for the relative humidity have a tolerance of approx. ± 3%
and that there may be a slight delay before the appliance itself/the de-
humidification function switches on or off.
►
The minimum humidity that can be achieved in continuous dehumidification
mode (
) is dependent on many factors, such as the room size or the
ambient temperature, etc. Therefore, it is not possible to define a generally
applicable minimum value.
FAN
No dehumidification takes place in this programme. The room air is drawn in
through the air inlet
3
, passes through the filter
5
and is discharged back into
the room through the air outlet
7
.
Select this programme if you want to circulate but not dehumidify the air in the
room.
Содержание 367016 2010
Страница 3: ...A B C ...