Silvercrest 353054_2007, Руководство по эксплуатации

Страница: 17 / 200

SED 3.7 G3
■ 14 │ GB │ IE
7) When you are finished with the treatment, place the speed
switch
5
to “0”.
8) Clean the epilator head
2
as described in the section
“Cleaning and Care”.
9) If necessary, remove the massage roller attachment
9
and place
the protective cap
1
on the epilator head
2
.
NOTICE
► Stop using the epilator head
2
immediately if it is damaged!
To order a new epilator head
2
, please contact the Service
Department (see section “ Ordering replacement parts ”).
To replace the epilator head
2
, please proceed as follows:
― Press the two restraint fixtures
3
together, and at the same
time pull the epilator head
2
upwards.
― Press the new epilator head
2
onto the appliance.
The epilator head
2
must click into place.
Cleaning and Care
RISK OF ELECTRIC SHOCK
► Before cleaning, disconnect the appliance from the mains power
adapter
0
and the mains power adapter
0
from the main power
supply.
WARNING! PROPERTY DAMAGE!
► NEVER submerse the appliance in water or other liquids!
■ After every use clean the epilator head
2
with the supplied
cleaning brush
w
to remove loose hairs.
■ Disinfect the epilator head
2
regularly by spraying and
cleaning it with disinfectant spray.