Silvercrest 351425 2007, Руководство по эксплуатации

Страница: 39 / 54

■ 36
│
GB
│
MT SSME 250 A4
Operating the appliance
1) Place the base
5
on a clean and level
surface.
2) Select the appropriate blender jug
1
/
9
for your smoothie:
–
large blender jug
1
, for a roughly
600 ml smoothie,
–
small blender jug
9
, for a roughly
300 ml smoothie.
3) Add the prepared ingredients to the blender
jug
1
/
9
. Always add liquid ingredients first
and then the more solid ingredients such as
the fruit and/or crushed ice.
CAUTION! MATERIAL DAMAGE!
► Never fill the blender jug
1
/
9
with ingre-
dients past the MAX marking! The appliance
will not be able to process the ingredients!
► Always add at least 100 ml of liquid into the
blender jug
1
/
9
when making a smoothie.
4) Check whether the sealing ring is correctly
seated in the blade holder
4
. Place the blade
holder
4
on the blender jug
1
/
9
so that the
blade
3
extends into the blender jug
1
/
9
,
and screw the blade holder
4
firmly in place.
5) Now place the blade holder
4
and the
attached blender jug
1
/
9
onto the base
5
so that the arrow on the blade holder
4
is
pointing to the symbol on the base
5
.
CAUTION! MATERIAL DAMAGE!
► To turn the blade holder
4
, always hold only
the blade holder
4
and never try to turn the
blender jug
1
/
9
! Otherwise, the blender
jug
1
/
9
will detach and the ingredients will
spill out!
6) Then turn the blade holder
4
so that the arrow
on the blade holder
4
points to the symbol
on the base
5
. The blade holder
4
must
audibly click into place so that it sits firmly on
the base
5
.
NOTE
► The appliance will only start if the blade
holder
4
, the blender jug
1
/
9
and the
base
5
are assembled correctly.
7) Insert the plug into a mains power socket.
8) Set the speed switch
6
to the required speed
and wait until the smoothie has reached the
desired consistency.
9) Set the speed switch
6
to “0“.
NOTE
► If the ingredients do not mix properly, it may
be necessary to lift up the appliance and
shake it a little. When doing so, take hold of
the blade holder
4
together with the blender
jug
1
/
9
and the base
5
so that they do
not come apart.
CAUTION! MATERIAL DAMAGE!
► Do not operate the appliance for longer than
1 minute in one session. The appliance will
overheat! After using for 1 minute, allow the
appliance to cool down completely.
CAUTION! MATERIAL DAMAGE!
► To turn the blade holder
4
, always hold only
the blade holder
4
and never try to turn the
blender jug
1
/
9
! Otherwise, the blender
jug
1
/
9
will detach and the ingredients will
spill out!
10) When the smoothie is ready, turn the blade
holder
4
until the arrow on the blade holder
4
points to the symbol on the base
5
and
remove the blade holder
4
with the attached
blender jug
1
/
9
.
11) Turn the blender jug
1
/
9
over and unscrew
the blade holder
4
.
12) Screw the lid
2
/
8
onto the blender jug
1
/
9
. You can drink the smoothie through the
drinking opening on the lid
2
/
8
.
IB_351425_SSME250A4_LB5.indb 36 12.10.2020 14:35:42