SND 3600 D3
GB
│
IE
│
NI
│
11
■
Inserting slides
♦
Insert slides the right way round into the shaft provided on the
slide magazine
6
. Around 10–12 slides (depending on size)
can be added to the magazine .
♦
Push the slide magazine
6
into the slot
4
on the right with the
viewing window at the front . Ensure that the triangle marking is
at the front and visible (see figure 2) .
Use the pusher on the side of the slide magazine
6
to push the
slides in the shaft individually into the scanner .
♦
To do this, first slide the pusher away from the scanner as far
as the stop . Afterwards, move the pusher carefully towards the
scanner .
NOTE
►
This pushes any slide that is in the scanner out of the device
and a new slide is pushed into the viewing range of the
scanner .
►
Make sure that you push the new slide into the scanner
slowly . If you push too quickly, the slide could slip past the
viewing range of the scanner .
♦
When you have finished scanning slides, remove the slide maga-
zine
6
from the slot
4
.
Remove the last slide from below from out of the slide magazine
viewing window
6
.
Содержание 345185 2004
Страница 3: ......
Страница 4: ...2x 345185 345185_ _20 2004 04 SND 3600 D3 SND 3600 D3 Quick Start Guide ...
Страница 30: ...SND 3600 D3 26 GB IE NI ...
Страница 56: ...SND 3600 D3 52 DE AT CH ...